Kunz AcrEase MR55B Скачать руководство пользователя

Страница: 19 / 21

OPTIONAL EQUIPMENT

OPTIONAL WETLANDS KIT

The optional wetlands kit features an extra set of tires for added ground support in soft or water
saturated areas. The following are applications and features that the wetlands kit works best in.

•

Great for wetlands or marshy areas that stay wet all year around.

•

Works well in combination with small personal amphibious vehicles or tracked ATVs.

•

More than doubles the tire surface area in contact with the ground.

•

Very easy to install bolt-on kit.

•

Works on all existing and new rough cut mowers.

•

The rough cut mower

will not

float with the wetlands kit installed. Water greater than 2-3" in

depth should be avoided.

•

With the Wetlands Kit installed the minimum cutting height is 3.5” – 4”.

Wetlands Kit (Part # 003905)

Содержание AcrEase MR55B






















Результаты поиска

Содержание AcrEase MR55B

Отзывы:

Похожие инструкции для AcrEase MR55B

Бренды по названию

Популярные бренды

Kunz AcrEase MR55B, Руководство пользователя

Результаты поиска

Содержание AcrEase MR55B

Отзывы:

Похожие инструкции для AcrEase MR55B

Бренды по названию

Популярные бренды