KUNBUS GmbH
8
KUNBUS Ethernet Test Access Point TAP-2100
2 Introduction
With the KUNBUS-TAP 2100, KUNBUS makes a network monitor available for the
analysis of all current industrial ethernet solutions. Using four probe ports, this device
allows logging of up to two independent real-time ethernet connections. An internal
delay of 0
μ
s makes the KUNBUS-TAP Data Sniffer nearly transparent for the data
channels to be tested.
The Data-Sniffer is connected to a PC via a standard Gigabyte ethernet interface.
Network monitors read and analyze the tapped packet data, such as the freely available
„Wireshark“.
2.1
Scope of delivery
• Storage case
• TAP-2100
• Plastic cover
• Cable for power supply
• Euro
Adapter
• Operating manual on USB-Stick (Present version at http://tap.kunbus.de)
• Wireshark plugins on USB-Stick (Present version at http://tap.kunbus.de)
2.2
Areas of use
•
Measuring system for real-time Ethernet bus systems
• Number of Ethernet ports 4+1 (cutting of 2 lines)
• Uplink-Port: - 1 GBit/s 1000BASE-T Ethernet - RJ45 socket
• Probe Ports: - 100 MBit/s 100BASE-TX Ethernet - RJ45 port, full and half-
duplex
• Zero delay ~0
μ
s
• Resolution time stamp 1 ns
• Diagnostics: 3 LEDs
• Un
fi
ltered forwarding of CRC errors
