Kummert PushBuddy, Инструкция по эксплуатации

Страница: 22 / 27

47
EN EN
47
Clean the waterproof part under
running water. Clean the splash water
protected parts and the accessories with
a clean wet tissue.
If necessary, the drive wheels can be
removed. Insert the holding tool into the
respective wheel and hold it tight. Open
the screw connection with the torque
wrench. Put the screw aside.
After cleaning, insert the wheels again.
Make sure that the wheel engages into
the wheel housing. Insert the screw back
into place. Tighten the screw with the
torque wrench until it clicks.
Splash water protected
Waterproof