12
1.3. Spare parts
Only use original spare parts supplied by the manufacturer!
1.4. Disposal
Unless both parties agreed otherwise on recycling or disposal, all components
must be properly disassembled and recycled as follows:
• Scrap any metal parts.
• Recycle any plastic elements in the appropriate manner.
• Dispose of all other components separately depending on their nature of
material.
2.0 Safety
2.1 Safety information
• The colour camera is to be used for the inspection of cleaned pipes
only!
• Work inside the camera may solely be conducted by the manufacturer
or authorized service personnel!
• Connect or disconnect individual system components only with the
power switched off!
• Screw the camera head into the connection completely to ensure that
the seal is watertight!
• Please check the camera for dirt and/or damage prior to use!
• Never clean the camera with a high-pressure washer! (Damage of the
seals may occur.)
• Do not use harsh detergents for cleaning the camera!
Caution!
Electrical waste, electronic components, lubricants and other substances
must be treated as hazardous waste and may only be disposed of by certified
specialist companies!
Caution!
Incorrect or faulty spare parts supplied by third party manufacturers may da-
mage the device. If, however, spare parts other than original parts supplied by
the manufacturer, or parts not purchased and resold by the manufacturer will
be used, all obligations assumed by the manufacturer or their dealers, like war-
ranties, service contracts, etc. will be forfeited immediately without notice.
