EN
WWW.BORMANNTOOLS.COM
4
Please read this instruction manual carefully before operation and keep this manual handy.
General Safety instructions
•
Do not use inside house.
•
Keep away from flammable materials.
•
Do not smoke when filling.
•
Do not spill.
Pre-Operation Check
OIL LEVEL
Caution!
•
Be sure to check the engine on a level surface with the engine stopped.
•
Use 4-stroke motor oil sae 10w-30(0.6L) api se,sf,sg.
•
Fill the oil to the edge of the oil filler neck.
•
Add the engine oil slowly to avoid overflowing,as the engine oil tank capacity is small.
•
Check the fuel level from the outside of the fuel tank.
•
If the fuel level is low, fill the fuel to the upper level.
•
Never use an oil/gasoline mixture or dirty gasoline.
•
Check for dirt in the air cleaner element, if the element is dirty, clean it.
•
Check for loose bolts and nuts,tighten them,if necessary.
Starting and Stopping the Engine
Starting the engine
•
Turn the engine switch to the “on”(on the equipment side).
•
To start a cold engine ,move the choke lever to the close position.
•
Press the primer bulb several times until a fuel flow in the fuel return is visually noticed.
•
Pull the starter grip lightly until resistance is felt,then pull briskly, returned the starter grip gently.
•
Turn the chock lever to the open position ,as the engine warm up.
Stopping the engine
Move the throttle lever to the slowest position(on the equipment side) turn the engine switch to the “off” position(on the
equipment side).
Set the throttle lever at the desired position(on the equipment side).
Maintenance
Maintenance Schedule
1: Check 2:Clean 3:Replace If Necessary 4:Change 5: Check-Readjust
This product Should Be Serviced By Professional People!
Oil Change
Remove the oil filler cap.
Drain the oil by tilting the engine.
Fill the oil to the edge of the oil filler neck.
Install the oil filler cap.
Spark Plug
Loosen 5mm hex bolt,then remove the top cover do not pull the starter grip and start the engine when the top cover
removed.
Remove the spark plug cap.
Clean the deposit.
Measure the clearance
