Kuma Stoves K-ASP, Инструкция по установке и эксплуатации

Страница: 9 / 31

9
Special Requirements for mobile homes
2. If installing in a mobile home, drill a small hole through the hearth and route an 8 gauge copper
wire into the crawl space. Use a grounding connector or lug to attach the wire to the stove and to
the frame of the mobile home.
3. When required by local code, you will need to fasten the stove to the floor of the mobile home.
(This applies to mobile homes only). To fasten a leg model, simply mark the location of the hole
in the bottom of the legs, drill holes and bolt into the bottom of the leg from the crawl space. To
fasten a pedestal model, holes will need to be drilled in the pedestal base. Once the holes are
drilled in the base, mark the location on the floor and use bolts and nuts or lag screws to fasten.
4. The stove must be connected to a 6” factory-built chimney conforming to CAN/ULC-S629,
standard for 650

C factory built chimneys and the top sections must be removable for
transportation of the mobile home.
Your stove is now ready for use. If your stove installation required a permit and requires inspection by the
local building department please do not forget to call for an inspection. It is important that your permit and
inspection be finalized, as some insurance companies will require the stove to be inspected. It is also a
great idea to give your insurance a call and let them know that you have installed a wood stove.
PLEASE REFER TO SECTION 4-“
Wood Burning Operation Instructions” as well as “Before Operating”
checklist before lighting your first fire.