To select each mode described in the previous page,
Please follow the instruction below.
① Make sure the machine is turned off.
Press ③ for a few second and press the power
switch while pressing ③.
② Press ① key once to change the mode from the [Prn].
And press ① again to change the mode back to [PC]
If the PTS is not the transmission model, either can be selected.
③ Press ② to complete the selection.
Then the selection will move to the next setting.
④ Press ① key once to change the mode from the [Aut].
And press ① again to change the mode back to [Ind].
⑤ Press ② to complete the selection.
Then the selection will move to the next setting.
⑥ Press ① key once to change the mode from the [CH1] on.
And press ① again to change the mode back to [CH-] off.
⑦ Press ② to complete the selection.
After the selection of [CH1}, the power will be turned off.
Preparation (2)-②
Initial Setting ( Operation )
keep on pressing
Press to turn on
To select Transmission Mode
To select Loosening Mode
To select [ CH1 ] Mode
