Kuka KR 20-3, Спецификация

Страница: 44 / 81

44 / 81
Issued: 22.04.2016 Version: Spez KR 20-3 V2
KR 20-3
5.1.2 Intended use of the industrial robot
The industrial robot is intended exclusively for the use designated in the “Pur-
pose” chapter of the operating instructions or assembly instructions.
Any use or application deviating from the intended use is deemed to be misuse
and is not allowed. The manufacturer is not liable for any damage resulting
from such misuse. The risk lies entirely with the user.
Operation of the industrial robot in accordance with its intended use also re-
quires compliance with the operating and assembly instructions for the individ-
ual components, with particular reference to the maintenance specifications.
Misuse
Any use or application deviating from the intended use is deemed to be misuse
and is not allowed. This includes e.g.:

Transportation of persons and animals

Use as a climbing aid

Operation outside the specified operating parameters

Use in potentially explosive environments

Operation without additional safeguards

Outdoor operation

Underground operation
5.1.3 EC declaration of conformity and declaration of incorporation
The industrial robot constitutes partly completed machinery as defined by the
EC Machinery Directive. The industrial robot may only be put into operation if
the following preconditions are met:

The industrial robot is integrated into a complete system.
or: The industrial robot, together with other machinery, constitutes a com-
plete system.
or: All safety functions and safeguards required for operation in the com-
plete machine as defined by the EC Machinery Directive have been added
to the industrial robot.

The complete system complies with the EC Machinery Directive. This has
been confirmed by means of an assessment of conformity.
Declaration of
conformity
The system integrator must issue a declaration of conformity for the complete
system in accordance with the Machinery Directive. The declaration of confor-
mity forms the basis for the CE mark for the system. The industrial robot must
always be operated in accordance with the applicable national laws, regula-
tions and standards.
The robot controller is CE certified under the EMC Directive and the Low Volt-
age Directive.
Declaration of
incorporation
The partly completed machinery is supplied with a declaration of incorporation
in accordance with Annex II B of the EC Machinery Directive 2006/42/EC. The
assembly instructions and a list of essential requirements complied with in ac-
cordance with Annex I are integral parts of this declaration of incorporation.
The declaration of incorporation declares that the start-up of the partly com-
pleted machinery is not allowed until the partly completed machinery has been
incorporated into machinery, or has been assembled with other parts to form
machinery, and this machinery complies with the terms of the EC Machinery
Directive, and the EC declaration of conformity is present in accordance with
Annex II A.