24
|
EN
TIG AC
- Setting the second current of the CYCLE function
Activation is performed by pressing the control n-coder one after the other.
TIG HF
N-coder
TIG AC triangle
wave
TIG AC square
wave
TIG AC sinusoid
wave
Setting the
TIG DC
method
Use the waveform switch to select the appropriate option.
TIG HF
N-coder
Waveform switching button
TIG DC
TIG DC
- Setting the welding current
The welding current is set using the control n-coder. Activation is performed
by pressing the control n-coder one after the other.
TIG HF
N-coder
Welding current
TIG DC
Main current indicator
TIG DC
- Setting the PRE-GAS function
The function serves to provide a protective atmosphere before the arc is ig-
nited. Pressing the control button on the torch activates the function that is
active for the set time. After the set time has elapsed, the welding arc ignites.
Activation is performed by pressing the control n-coder one after the other.
TIG HF
N-coder
TIG DC
TIG DC
- Setting the START CURRENT function
The function allows setting the starting current which is activated when the
arc is ignited. The function setting eliminates burn-through of the material
to be welded by immediately starting the main welding current. Activation is
performed by pressing the control n-coder one after the other.
TIG HF
N-coder
TIG DC
TIG DC
- Setting the UP-SLOPE function
The function allows to set a continuous current increase from the START CU-
RRENT function to the main welding current. Due to this function, the begi-
nning of the weld is gradually heated and burning of the welded material is
eliminated. Activation is performed by pressing the control n-coder one after
the other.
TIG HF
N-coder
TIG DC
