Kühtreiber MAKin 200 P HF AC/DC, Руководство пользователя

Страница: 35 / 48

| 35 EN
OFF
N-coder Waveform switching
button
Mode switch
button
TIG HF DC
TIG DC - Setting CYCLE function
(current switching)
The function allows switching between two currents.
Activation is only possible in 4-stroke mode.
OFF
N-coder Waveform switching button TIG HF
DC
TIG DC - Setting second current
CYCLE function
Activation is performed by pressing the control n-coder
one after the other.
OFF
N-coder Waveform switching button TIG HF
DC
SPOT - Setting the SPOT WELDING func-
tion
This function is intended for spot welding of steel and
stainless materials. The automatic welding arc terminati-
on ensures a high-quality connection. The user must set
sufficient time and power to ensure an ideal connection.
This function is only active in TIG DC HF mode.
SPOT - Welding current setting
The welding current is set using the control n-coder. Acti-
vation is performed by pressing the control n-coder one
after the other.
OFF
N-coder Waveform switching
button
TIG HF
DC
SPOT - Setting PRE-GAS function
The function serves to provide a protective atmosphere
before ignition of the welding arc. Pressing the control
button on the burner activates the function that is active
for the set time. After the set time has elapsed, the wel-
ding arc ignites. Activation is performed by pressing the
control n-coder one after the other.
OFF
N-coder Waveform switching
button
Spots
DC TIG HF