Kühtreiber MAKin 200 Multi MIG, Инструкция по эксплуатации

Страница: 18 / 32

18 | en
Setting of welding parameters
Setting the welding method
the selection and confirmation of the welding method is carried out using the
control button.
MMA - a method designed for welding with a coated electrode crNi, al, alloys
and steel materials.
TIG LIFT - the method is designed for welding of crNi and steel materials with
dc current. it also allows soldering.
MIG/MAG - the method is designed for welding of steel, crNi and al materi -
als. it also allows soldering cusi.
MIG
VOLTAGE
WIRE SPEED
CURRENT
AIR
TEST
WIRE
FEED
miG/maG methode button
mma tiG liFt
MMA - Welding current setting
the welding current is set using the control n-coder.
MIG
VOLTAGE
WIRE SPEED
CURRENT
AIR
TEST
WIRE
FEED
Welding current
mma n-coder
MMA - Setting the hOT START function
(easier ignition)
the function allows setting the value of the welding current increase when
the arc is ignited. the function facilitates ignition of the welding arc. the func -
tion is set in the range of 0 - 10, which sets its intensity (0 = off; 10 = maxi -
mum). the function is activated by pressing the FuNctioN button (Fn), the
function is selected by rotating the control n-coder i in sequence, the function
parameter is set by pressing the control n-coder ii.
MIG
VOLTAGE
WIRE SPEED
CURRENT
AIR
TEST
WIRE
FEED
FuNctioN button
mma n-coder ii n-coder i
MMA - Setting the ARC FORCE function
(arc stability)
the function increases the energy supplied to the shortening arc by the
mma method, thereby accelerating the electrode melting and preventing
it from sticking. the function is activated when the arc voltage drops below
approx. 17 v. setting the value determines the possible increase in welding
current. the function is set in the range 0 - 10, which adjusts its intensity (0 =
off; 10 = maximum). the function is activated by pressing the FuNctioN
button (Fn), the function is selected by rotating the control n-coder i in se -
quence, the function parameter is set by pressing the control n-coder ii.
MIG
VOLTAGE
WIRE SPEED
CURRENT
AIR
TEST
WIRE
FEED
FuNctioN button
mma n-coder ii n-coder i
MMA - Setting the ANTI STICK function
(detachment of the electrode)
the function reduces the welding voltage to 5 v when evaluating the short-
-circuit at the output terminals (when the electrode is glued to the material
to be welded), thus allowing easy removal of the electrode from the ma -
terial to be welded. the function is automatically activated each time the
machine is switched on.
TIG DC LIFT - Adjust the welding current
the welding current is set using the control n-coder.
MIG
VOLTAGE
WIRE SPEED
CURRENT
AIR
TEST
WIRE
FEED
Welding current
tiG liFt n-coder