Troubleshooting
73
Troubleshooting
General
Troubles can mostly be easily and quickly be remedied. Before you
make an appeal to the service department, please check with help of
the table, if you can remedy the trouble by yourself.
•
Most malfunctions are caused by incorrect connections
•
Only restart the machine once the cause of the failure has been
identified. Otherwise, parts damaged as a result will not be covered
by warranty
Hydraulics
Problem
Cause
Solution
Page
Machine does not rotate
The slip clutch slips
> Lower the working speed
> Remove the blockage
Conditioner does not rotate
The gears of the gearbox are
switched between both gears
> Switch to the correct gear
45
Hitching frame height too high
Mowing unit not in correct work-
ing position
> Lower the mowing unit in
working position
41
Bad cutting quality
•
rpm too high
•
left and right blades switched
•
blades are dull
•
conditioner blockage
•
worn conditioner fingers
•
ground pressure too low
> Lower the rpm
> Switch the left and right
blades
> Mount new blades
> Remove the blockage
> Mount new conditioner fin-
gers
> Increase the ground pressure
•
43
Lifting out height at the headland
too low
•
hitching frame height too low
•
storing lock not in working po-
sition
•
Move the hitching frame to
the correct height
•
Move the storing lock in cou-
pling position
•
36
Problem
Cause
Solution
Page
Hydraulic pressure not increas-
ing
Dirty oil
> Drain, clean out the circuit
and refill with new oil