KUHN Merge Maxx 900 Скачать руководство пользователя страница 98

Страница: 98 / 114

Merger

Merge Maxx 900

Maintenance and storage

4. Storage

At the end of each season:

- Clean the machine thoroughly.
- Lubricate the whole machine.
- Check tyre pressure:

• Transport wheels: 2 bar (29 psi).

- Touch up any areas of damaged paintwork.
- Check and replace worn or damaged tools.
- Put the machine under cover in a dry place.
- Store control box in a dry place free of dust

At the start of each season:

- Re-read the operators' manual.
- Check tyre pressure:

• Transport wheels: 2 bar (29 psi).

- Check that all nuts and bolts are sufficiently tightened.
- Make sure that all protection devices are in place and

in good condition.

- Check that the brakes work correctly.

Содержание Merge Maxx 900



















































































































Результаты поиска

Содержание Merge Maxx 900

Отзывы:

Похожие инструкции для Merge Maxx 900

Бренды по названию

Популярные бренды

KUHN Merge Maxx 900, Руководство оператора

Результаты поиска

Содержание Merge Maxx 900

Отзывы:

Похожие инструкции для Merge Maxx 900

Бренды по названию

Популярные бренды