KUHN Merge Maxx 900 Скачать руководство пользователя страница 52

Страница: 52 / 114

Merger

Merge Maxx 900

Instructions for work

Instructions for work

1. Putting the machine into work

position

From the transport position:

- Press on the button

ON/OFF

• Indicator light (1) flashes.

Wait for the hour counter to appear on the screen.

- (a): hour (0 to 9999).
- (b): minute (0 to 59).

- Press for approximately 1 second on the navigation

key:
• Indicator light (1) comes ON.
•

- - 1 - -

is displayed on the screen.

- Operate tractor hydraulic valve

• The machine is unlocked.

Before placing the machine in working
position:

- Check that nobody is within the machine

pivoting area.

- If there is someone, make sure the

person moves away.

If the hour counter is not displayed, contact your
Kuhn dealer.

Содержание Merge Maxx 900



















































































































Результаты поиска

Содержание Merge Maxx 900

Отзывы:

Похожие инструкции для Merge Maxx 900

Бренды по названию

Популярные бренды

KUHN Merge Maxx 900, Руководство оператора

Результаты поиска

Содержание Merge Maxx 900

Отзывы:

Похожие инструкции для Merge Maxx 900

Бренды по названию

Популярные бренды