6. - Putting into service
HRB122-152-182
37
KN135HGB_D
Power harrows
Axial or offset working position
The power harrow can be offset with regards to the
tractor axis:
• Either by sliding the lower linkage arms sideways
(for little offset).
• Or by moving the hitch frame and sliding the
lower linkage arms sideways.
If the machine in offset position exceeds the
tractor width, fit signalling equipment.
Power harrow HRB 122:
- The headstock can be offset from its central
position (a) to the right by maximum D = 147 mm
(5.7’’).
Power harrow HRB 152:
- The headstock can be offset from its central
position (b) to the right or left by maximum D =
147 mm (5.7’’).
D
a
D
D
b
