KUHN HR303D, Руководство оператора

Страница: 77 / 96

Maintenance and storage
Power harrows
HR303D/M
75
3. Lubrication
Except for the secondary PTO shaft lubrication, the
machine must be placed in transport position for all
maintenance operations.
Clean grease nipples before greasing.
Primary PTO shaft
Every 250 hours or at the end of the season:
- U-joints (1).
- Transmission tube:
- guide rings (3):
• Unlock and slide guards for easier greasing of the
pto shaft u-joints and guiding bushes.
The 2 half-PTO shafts are separated:
- Transmission tube (The two grease nipples (2)).
Lubricate with SHELL multi-purpose grease
grade NLG
I
2.
It is necessary to grease the 2 greaser zerks
(2) (Slide the black collar).
In intensive use with tractors of maximum
authorized power, it is recommended to
grease at closer intervals (Interval of 100 to
150 hours).