KUHN GMD602 GII, Руководство оператора

Страница: 36 / 64

Disc mower
34
GMD602 GII
Instructions for work
$ INSTRUCTIONS FOR WORK
1. Putting the machine into work
position
From the transport position:
- Pull the release cord until transport lock is released.
- Pressurize the transport/work position cylinder to
place the mowing conditioning unit in working
position.
- Lower the machine using the tractor lift linkage H =
550 mm (1’10’’).
The machine is in headland turn position.
Lower the mowing unit onto the ground using the
mowing unit lift cylinder.
Shift the mowing unit lift cylinder directional control valve
in float position.
The machine is in working position.
Before placing the machine in working
position:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
If the tractor is fitted with a hydraulic valve with
adjustable flow rate, reduce oil flow to limit
pivoting speed.
For tractors not equipped with a floating position,
continue activating valve during 3 to 4 seconds
after the setting into work position is ended.
During work, only use the mowing unit lift
cylinder to place the machine in headland
turn position.