KUHN GMD4410 Скачать руководство пользователя страница 52

Страница: 52 / 120

GMD4410

7. - Instructions for transport

KN045MGB G

Disc mower

7. Instructions for transport

7.1

Putting the machine into
transport position

From the working position:

The machine is in transport position.

Before placing the machine into transport
position:

Check that nobody is within the

machine pivoting area.

- If there is someone, make sure the

person moves away.

- Use mowing unit lift cylinder to lift the mowing unit.
- Lift the machine with the tractor's three point

linkage.

Pull the release cord until transport lock is

released.

- Activate the transport/work cylinder to bring the

mowing unit in transport position.

- Release cord.

The machine automatically locks in transport
position.

If the intermediate PTO shaft torque limiter
has become very hot due to slippage, wait for
it to cool down before pivoting the machine
into transport position.

Never engage the tractor PTO drive when the
machine is in transport position.

Содержание GMD4410

























































































































Результаты поиска

Содержание GMD4410

Отзывы:

Похожие инструкции для GMD4410

Бренды по названию

Популярные бренды

KUHN GMD4410, Руководство оператора

Результаты поиска

Содержание GMD4410

Отзывы:

Похожие инструкции для GMD4410

Бренды по названию

Популярные бренды