From the transport position:
Lock and secure machine in this position.
Place a container of sufficient capacity under drain plug.
Remove filler plug (1) and its washer.
Remove drain plug (2) and its washer.
Allow oil to drain completely.
Wait for dripping to stop.
Place the machine in working position.
Pour the correct oil quantity and quality through the
opening of the filler plug.
Checking the oil level:
The oil level must reach the lower edge of the emptying
hole.
Clean and reinstall drain plug (2) and its washer.
Replace if necessary.
Clean and reinstall filler plug (1) and its washer. Replace
if necessary.
Step 2.
Breather plug checking and cleaning
Page 22/95
Printing date : 06-02-2014
GMD44_760001_xxxxxx
©Copyright KUHN S.A.
