- 32 -
STORING THE MOWER
- Thoroughly clean the mower.
- Drain oil from gearbox and cutterbar and refill with new oil to correct level.
- Inspect and replace worn knives and their fixation hardware.
- Paint all areas from which the paint has worn.
- Release belt tension.
- Store the mower in a dry place.
OPTIONAL EQUIPMENT
1) SIGNALLING ELEMENTS
(Kit no. 107 6110 for GMD 602 F - 702 F)
The signalling kit is part of the standard equipment on the GMD 802 F.
Install the signallings elements as described on page 11.
2) PTO SHAFT YOKE 1 3/8" - 21 SPLINES
Code 4603 187
[for GMD 602 F/702 F/802 F
1000 rpm (min
-1
)]
Code 4603 256
[for GMD 602 F/702 F/802 F
540/1000 rpm (min
-1
)]
This yoke is available for tractors with 1 3/8" - 21
splines front PTO shafts (photo 32).
3) DRIVE KIT FOR 540 & 1000
rpm
(min
-1
)
INPUT SPEED (ROTATIONAL FREQUENCY)
[for GMD 602 F/702 F/802 F 1000 rpm (min
-1
)]
Code No. 103 6220
See separate Bulletin No. 066 682 00 supplied with this equipment.
Quantity of oil in rotor gearbox for an input speed (rotational frequency) of 540 and 1000 rpm (min
-1
): 0.6 litre [grade
SAE 80 W EP (GL4)].
4) FRICTION SLIP CLUTCH EQUIPMENT
Code 103 6240
The original shear bolt clutch (see page 22, photo 24) can be replaced by a slip clutch.
See separate Bulletin No. 066 249 00 supplied with this equipment.
5) RAISED SKIDS EQUIPMENT
Code 103 6250
A cutting height of 55 mm can be obtained by replacing the end skids by 2 raised skid shoes. This equipment enables
to easily park the machine without having to alter the top link length.
See separate Bulletin No. 068 976 00 supplied with this equipment.
6) A FRAME CAT. 2
Code 127 6870
32
