KUHN GF5001 THA, Руководство оператора

Страница: 37 / 52

Instructions for work
Gyrotedder
GF5001 THA
35
4. Machine use
The machine can turn at 180° without loosing working
width or time.
The following drawing shows one way of using the
machine.
Groundspeed
The following factors determine the forward speed:
- The humidity level (This factor is particularly
determining when wilting).
- The crop density.
- The crop composition (blade length).
- The ground contours.
Below are a few recommendations for your
information:
In dense and average length crop:
- When wilting a crop with low humidity level.
• the speed is approximately of 7 to 8 km/h (4.4 -
5 mph).
- When tedding a more or less dry crop.
• The speed can reach approximately 10 to 12 km/h
(6.3 - 7.5 mph).
• The dryer the crop, the more the PTO speed must
be reduced.
• For a very dense, humid crop composed of very
long blades, the forward speed must be reduced.
Preferably take large headland turns.
For difficult working conditions, it is
recommended to operate at a lower forward
speed.