KUHN GF5001 THA, Руководство оператора

Страница: 29 / 52

Putting into service
Gyrotedder
GF5001 THA
27
Uncoupling the machine
From the transport position:
- The machine is fitted with front and rear parking
stands.
- Rear parking stand positioning:
• Remove R-clip.
• Fully lower parking stand.
• Secure using R-clip.
- Front parking stand positioning:
• Place parking stand in vertical position (a).
• Lock parking stand using specific pin (b).
• Adjust parking stand height using crank handle.
- Remove and place safety chain on the drawbar.
- Uncouple PTO shaft (1) and place it in its holder.
Park the machine on an even fairly level
ground.