KUHN GA4121GM, Руководство оператора

Страница: 53 / 88

9. - Optional equipment
GA4121GM
51
KN129DGB D
Gyrorake
- Fit the roll pins (1) on original wheel support (2)
using washer (3) and nut (4).
- Tighten nut (4).
- Fit curved greaser (5).
- Fit bogie axle (6) on original support (2).
- Insert split pin (7) and tube clip (8) and connect
them using link (9).
- Fill cover with grease as well as the space
between bearings and original wheel rim.
- Fit original wheel on wheel stub axle (10).
9.4.2 Machine use

Height adjustment
- Lift the machine using the tractor's lift linkage.
- Remove tube clip (1).
- Pull on bogie axle (2) to free pin (3) from its
housing.
- Position bogie axle so that pin (3) is in line with a
hole of adjustment plate (4) corresponding to the
required setting.
- Push bogie axle back in place.
- Insert tube clip to secure bogie axle.
Proceed the same way on the second wheel
support.
Proceed the same way with the second bogie
axle.
Left and right bogie axles can be adjusted at
different heights.
2
5
6
7
1
9
8
10
3
4
1
2
3
4
1
2
3
4