KUHN GA 9321 H/P, Руководство оператора

Страница: 14 / 38

- 12 -
TRACTOR ADAPTATION
1) FITTING TO THE TRACTOR
The GA 9321 H/P can be fitted to all tractors with a standard three-point linkage Cat.2 or 3 and an engine rating
ranging 74 kW (100hp).
The swivel hitch is equipped with two attachment yokes (1) to be connected to the tractor’s lower links(2)
(photo 1).
Attachment should always be made inside the yokes (1). Two bushes (diameter 37mm/ 1 1/2") are supplied
with the machine for attachment to cat.3 tractors.
Always make sure the tractor lower links are immobilized using the means provided (check chains, etc…)
Using the tractor 3-point lift, position the attachment frame so that the tractor lower links are 750 mm (2’6")
above ground level (horizontal carrying frame).
Connect:
-
The hydraulic hoses (3) (check that the oil flow direction in the machine is respected).
- The 7-pin (4)electric lighting socket (photo 2).
- The 3-pin (5) control box supply socket.
Depending on the machine braking system connect:
-
the two pneumatic hoses (8) (photo 3a)
- the hydraulic braking hose
When the machine is attached to the tractor, retract parking stand by pulling on handle (7) and pivot it (see
arrow) until lock automatically engages (photo 3).
A handle on the parking stand makes it easier to operate.