Troubleshooting guide
Power tiller
EL82
59
$
Troubleshooting guide
Problem
Cause
Remedy
Noisy drive when lifting the
machine.
Top link of 3-point hitch badly
positioned/adjusted.
Position top link parallel to the
lower links.
Excessive lifting height.
Limit the lift linkage stroke.
Noisy drive during work.
Machine tilted to the front or rear
(excessive pitch angle).
Lengthen or shorten top link to
set the machine horizontally
during work.
Insufficient machine side to side
stabilization.
Adjust stabilizers of lower links to
prevent machine side to side or
up and down movements.
Excessive power
requirement. (Very wet working
conditions).
Working depth too deep.
Set and control the working
depth.
Excessively worn tools.
Replace the whole set of tools to
ensure rotor balance.
Important ground projections to
the rear.
Incorrect hood positioning.
Adjust hood position.
- 1 Hood:
• Models 130 - 155 - 180
- 2 Hoods:
• Model 205.
Excessive power
requirement. (Dry working
conditions).
Working depth too deep.
Set and control the working
depth.
Incorrect hood positioning.
Adjust hood position.
- 1 Hood:
• Models 130 - 155 - 180
- 2 Hoods:
• Model 205.
Tilth is too coarse.
Excessive ground speed.
Reduce ground speed.
