Power tiller
56
EL82
Maintenance and storage
Tool replacement
Tool replacement
- Lower the machine.
- Uncouple PTO shaft on machine side.
- The machine rotor is factory set with C-blades.
- According to the work to carry out, there are two blade
layouts:
• Fitting of 3 pairs of blades per flange: 3 right blades
and 3 left blades (factory fitted) (1).
• Fitting of 2 pairs of blades per flange: 2 right blades
and 2 left blades (2).
Partial replacement:
• Replace concerned tools
Immediately replace worn or damaged parts
with genuine KUHN parts.
- Right C-blades.
- Left C-blades.
To distinguish right blades from left blades, note
that the sharp edge faces the rotor direction of
rotation (1).
For shallow depth work, the machine can be
fitted with L-blades available through KUHN
PARTS:
- (a) Left L-blades.
- (b) Right L-blades.
1
2
1
a
b
