manualshive.com logo in svg

KUHL FC 303 GC, Инструкции перед доставкой

Поделиться
Скачать
KUHL FC 303 GC Скачать руководство пользователя страница 30

- 29 -

MACHINE ASSEMBLY

Swath board assembly

Slightly loosen the mounting screws of the
hinge fitted on the frame left leg.
Insert the left swath board in the hinge slots :
tighten the hinge mounting screws to the
proper torque.
Proceed the same way for the right swath
board.
The swath boards are correctly assembled if
they pivot freely on their hinges.

Rear swathing hooding assembly

Remove the crank fixed onto the swath
boards.
Fit the pivot tube of the right hooding side in
the right frame housing.
Place the hooding against the rear frame
shield and fit the four screws previously re-
moved.
Proceed the same way for the left hooding
side.
Fit the four screws which connect the right and
left hoodings together.
Tighten  all  screws  to  the  proper  torque
starting with those connecting the left and right
hoodings together.

Mount the swath board locking handles in the
folllowing assembly order :

1. Pass the cup square bolt through the

swath board and hooding

2. Fit the nylon washer
3. Fit the handle
4. Fit the self-locking nut.

Содержание FC 303 GC









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды