Kugelmann K-TRONIC 2, Оригинальная инструкция по эксплуатации

Страница: 31 / 150

// ORIGINAL OPERATING INSTRUCTIONS
Commissioning 11/15/2016 31/150
1 Fit master (Pos. 10) at appropriate place in the carrier vehicle.
2
Install connection box (Pos. 50) at an appropriate place
within
the cabin.
3 Take drive signal (Pos. 70) from the carrier vehicle.
4 Connect power supply cable (Pos. 60) with the carrier vehicle.
5 Plug in the master cable (Pos. 30) at the rear
of the master (Pos. 10) and at the 19 pin joint
(Pos. 80) at the connection box (Pos. 50). Pay
attention to the marked protrusion!
6 Connect connecting cable (Pos. 40) at the connection box
(Pos. 50).