TILING ALLOWANCE
To overcome the width of the integral upstand of the shower tray, either method can be used
IMPORTANT: IF THE DIMENSIONS SHOWN ARE EXCEEDED THEN THE GLASS PANEL(s) WILL NOT FIT
APPLY FINISH TO WALLS
Fit tiles/shower panels to the walls and apply silicone sealant where tiles/panels meet tray at bottom
INSTALL WALK-IN SHOWER ENCLOSURE
The shower enclosure can be fitted to suit both right-hand access (illustrated) and left-hand access installations
Note: If you are installing the recess version (front panel glass only), then please ignore any reference to the side
glass panel instructions
15
16
17
METHOD ‘A’
SPACER PANEL TO WALL
MUST NOT EXCEED 15mm
METHOD ‘B’
TRAY CHASED INTO WALL
MUST NOT EXCEED 15mm
TILED SURFACE
MUST NOT BE LESS THAN
878mm
(1500 tray)
1066mm
(1700 tray)
FROM CENTRE OF BUSH
TO FINISHED TILED SURFACE
MUST
NOT
BE LESS
THAN
607mm
(1500 & 1700 trays)
FROM CENTRE OF BUSH
T
O FINISHED
TILED SURF
ACE
Right Hand Access
Tray shown
WATER OUTLET
BODY
WALLPOST
COVER CAP
FINIAL TOP/
RAIL HOLDER
ASSEMBLY
RAIL WALL
BRACKET
SPACER COLLAR
ASSEMBLY
SHROUD
FINIAL BOTTOM
ASSEMBLY
CORNER ENCLOSURE / RIGHT HAND ACCESS
UTILISING UNDER-TRAY WATER SUPPLY
RECESS ENCLOSURE / RIGHT HAND ACCESS
UTILISING OVERHEAD WATER SUPPLY
WALLPOST
COVER CAP
SHROUD
(to ceiling)
RAIL WALL
BRACKET
RAIL JUNCTION
BRACKET
