Kubota XN12-8, Руководство по эксплуатации

Страница: 97 / 182

Transportation
Loading and Unloading
Loading and Unloading
Warning
The machine will probably roll over or fall
off during unloading. Ensure to take the
following safety measures:
●
Select a solid and level ground and keep
a sufficient spacing from the road curb.
●
Fix the ramps of sufficient strength and
dimensions to the cargo body of truck.
The inclination of the ramps shall not
e x c e e d 15
° . I f t h e r a m p s d e f l e c t
downward excessively, please support
the ramps by supports or cushion blocks.
●
Do not load or unload the machine by
working device. Otherwise, it w i l l
probably result in rollover or falloff of
machine.
●
Keep the truck cargo body and the
ramps clean without oil, sand, ice/snow,
or other impurity, in order to prevent
the side slip of machine. Clean the
tracks.
●
Block the wheels of transport truck by
wedges to prevent movement.
●
While loading or unloading the machine,
drive the machine slowly in 1
st
gear (low
speed) as per the signals of the signaler.
●
Do not change direction on ramps.
●
Do not slew/swing on ramps. Otherwise
the machine will probably roll over.
●
Slewing/swinging the machine on the
cargo body of truck will probably result
in unstable legs of machine. Therefore,
operate slowly.
●
If possible, lock the cab doors after
loading. Otherwise the cab doors will
probably open during the transport.
●
Plug securely the tracks by wedges and
then fix the machine to the truck cargo
body securely by ropes or chains.
During the loading or unloading of machine,
please ensure to use ramps or platform and
abide by following procedures.
1. Securely apply the parking device of
transport truck and block the wheels by
wedges.
2. Place the ramps securely onto the truck
cargo body. The inclination of the ramps
shall not exceed 15
°
.
Ramp
15
°
or less
Stop block
4-2
Distance
between
Fix to suspension
parts