Kubota VS 220 Скачать руководство пользователя

Страница: 12 / 154

Safety

safety regulations

This paragraph contains all the requirements, everything that is not

permitted and requirements for each form of usage, maintenance and

reparation of the machine.

The chapters in the manual contain additional safety measures.

Knowledge of the safety regulations forms the basis for safety and

proper usage of the machine.

Always follow the safety instructions. most accidents are avoidable.

Do not run the risk of serious or fatal accidents through ignorance of

these safety instructions.

Intended use

The machine is exclusively intended for spreading:

•

granules and powdery types of fertiliser,

•

sand and fine split,

•

grains and seeds.

Any other application would be considered to be irregular. The

manufacturer is not responsible for damage that may result from such

usage; risks are taken exclusively by the user.

The instructions, maintenance requirements and reparation stipula-

tions as indicated by the producer must be adhered to at all times.

Person

Responsibility of the user

The user may only operate the machine if he/she:

•

is familiar with the basic safety requirements and the working

conditions requirements,

•

is familiar with current traffic regulations,

•

has been duly instructed on how to work on/with the machine and

the related dangers,

•

has read and understood this manual,

•

is familiar with all the systems and operating elements and their

functions,

•

is familiar with the regulations for using, maintaining and repairing

machines.

It will be too late for that once you are working!

Irresponsible usage could lead to injury to the user or third parties and

could lead to damage to the machine.

Содержание VS 220



























































































































































Результаты поиска

Содержание VS 220

Отзывы:

Похожие инструкции для VS 220

Бренды по названию

Популярные бренды

Kubota VS 220, Руководство пользователя

Результаты поиска

Содержание VS 220

Отзывы:

Похожие инструкции для VS 220

Бренды по названию

Популярные бренды