DE6319
1
RDA-4
Interface Between AXS-100 and Magnetic Card Reader
or RDR-2/Wiegand Proximity Card/Tag Reader
Installation Instructions
1. INTRODUCTION
RDA-4 (fig. 1) is an interface unit
that enables the AXS-100 access
control system to operate with
various magnetic - stripe card
readers, proximity tag/card reader
or Wiegand reader.
The unit is connected between
the AXS-100 and a magnetic -
stripe card reader (see figure 2).
Note
Enrolling a new tag/card is
performed by using RDA-PC.
For details, refer to the
AXSalert software user guide,
section 5, par. 5.9.1.
Figure 1
External View
Figure 2 -
Integration of RDA-4
2. SPECIFICATIONS
Compatibility:
Compatible with RDC-3, RDC-3MP, RDR-2 and
all Wiegand readers.
Power Supply:
12 VDC (from AXS-100 system)
Power Output:
5 V magnetic card; 12 V RDR-2 or Wiegand reader
Operating Temperatures:
-20
°
C to 49
°
C
Dimensions (LxWxD):
118x75x34 mm (4-2/3x2-13/16x1-1/3 in)
Weight:
127g (4.5 oz)
Color:
Black
Recommended Wires to AXS-100:
Two shielded twisted pairs
Maximum Length of Cables:
RDA-4 to AXS-100:
100m (300 ft.)
RDA-4 to RDR-2:
100m (300 ft.)
RDA-4 TO RDC-3/RDC-3MP:
5m (15 ft.)
3. INSTALLATION
Figure 3:
Installation
4. RDA-4, RDR-2 AND RDC-3MP LEDS FUNCTION
The LEDs of RDA-4, RDR-2 and RDC-3MP light according to a
certain events, as detailed in the next table.
LED
Event RDA-4
RDR-2
RDC-3MP
Valid key
Green
Green
Green
Invalid key
Red
Red
(*)
Invalid door /
Invalid time zone
Flashing
yellow / red
Flashing
yellow / red
(*)
Idle Yellow
Yellow
(*)
* Red, as usual
