Kubota u25, Руководство оператора

Страница: 66 / 90

REGULAR CHECKS AND MAINTENANCE WORK 46
B
Checking Fuel Line and Intake Air Line
1. Check to see that all lines and hose clamps are
tightened and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
EVERY 250 SERVICE HOURS
Do all 50 hour servicing at the same time.
B
Lubrication of the Pilot Valve
Remove the rubber bellows from the underside of the
control levers. Grease the tip of the push rod and the
rotating part of the link.
EVERY 500 SERVICE HOURS
Do all 50 and 250 hour servicing at the same time.
B
Changing Engine Oil (Change the engine
oil every 500 hours, or every 1 year in the
case that service hour is less than 500
hours)
To avoid personal injury:
A First stop the engine then remove the key and
wait long enough for the oil to cool down.
1. Remove the drain plug on the underside of the engine
and drain all oil.
2. Re-tighten the drain plug.
(1) Fuel lines
(2) Clamp bands
(1) Hoses
(2) Hose clamps
(1) Rotating port of the link
(2) Tip of the push rod