Kubota u25, Руководство оператора

Страница: 34 / 90

OPERATION OF THE ENGINE 14
[Setting the minute]
Press switch 2 and the numeric setting will be smaller.
Press switch 3 and the numeric setting will be larger.
If switch 3 is pressed for a long time, the new settings will
be made.
A
If the battery is disconnected, the clock setting request
lamp " " (yellow) will blink for requesting the setting
the clock.
B
Battery Charge Lamp
This warning lamp lights up if the charging system fails
while the engine is running. When the starter switch is
turned
"ON" with the engine off, the lamp lights up, and
when the engine gets started, the lamp goes out.
A
If there is disconnection or failure in the charging
system when the key is turned to
"RUN" , the following
symbol will appear.
B
Engine Oil Pressure Warning Lamp
The engine oil pressure warning lamp lights up due to
failure of the lubricating system with the engine running.
When the starter switch is turned
"ON" with the engine
off, this lamp lights up, and when the engine starts, the
lamp goes out. If the lamp stays on with the engine
running, stop the engine and check the engine oil level.
A
If there is disconnection, failure or breakdown in the
lubricating system when the key is turned to
"RUN" ,
the following symbol will appear.
Switch 2 Switch 3
50
49
48
52
51
50
(1) Battery charge lamp
(1) Engine oil pressure warning lamp