Kubota u25, Руководство оператора

Страница: 31 / 90

11 OPERATION OF THE ENGINE
OPERATION OF THE ENGINE
To avoid personal injury:
A Read "SAFE OPERATION" at the beginning of
this operator's manual.
A
Obey the danger, warning and caution labels
on the excavator.
A To avoid the danger of exhaust fume
poisoning, do not operate the machine in a
closed building without proper ventilation.
A
Always start the engine from the operator's
seat. Do not start the engine while standing
next to the excavator. Before starting the
engine, sound the horn to get the attention of
persons standing nearby.
A Do not use starting fluid or ether.
A
In order not to overload the battery and starter, avoid
engaging the starter more than 10 sec.
A When engine does not start in 10 sec., please wait 20
sec. or more, before attempting to restart.
STARTING THE ENGINE
To avoid personal injury:
A
The operator should not depend solely on the
warning lamps, but should always conduct the
routine checks (see "MAINTENANCE").
Start the engine in the following manner:
1. Before starting the engine, make sure that all control
levers are in the neutral positions.
2. Pull the lock levers all the way back. (lock position)
A
Put the throttle lever towards .
3. Insert the key into the starter switch and turn it to the
position "Run". The glow lamp indicator will light up
while the engine is preheated and will go out
automatically after preheating is finished.
4. Turn the key to the position "START" and release after
the engine has started.
5. Check if oil lamp and charge lamp have gone out.
Should a warning lamp still be lit up, stop the engine
then remove the key and check for the cause.
A
When the lock levers are in "UNLOCK" position, the
engine does not start.
(1) Horn switch
(1) Drive lever (left)
(2) Drive lever (right)
(3) Attachment control lever (left)
(4) Attachment control lever (right)
(5) Lock lever
(1) Starter switch (A) "STOP"
(B) "RUN"
(C) "START"