Kubota T1460, Руководство оператора и каталог запасных частей

Страница: 15 / 44

ASSEMBLY
OM 0297SB-AU 13
Figure 3
S
NOWBLOWER
I
NSTALLATION
NOTE: Mower deck must be removed. Refer
to the tractor Operator's Manual for
instructions.
WARNING: To avoid serious injury:
Park the tractor on level ground, set to
neutral, apply parking brake, disengage
drive pulley, place all control levers to
neutral, shut off the engine, remove the
ignition key and make sure all parts in
rotation have stopped before leaving the
operator's seat and installing the
snowblower on the tractor.
1. (FIGURE 2) Secure the 7 1/2" pulley
(item 1) to the subframe shaft (item 2) using
a 1/4"NC x 2 1/2" lg socket head capscrew
(item 3) and a 1/4" NC nylon insert locknut
hex. Use the subframe shaft's upper hole
for T1760, T1770, T1870 tractors and the
second hole for T1460, T1560, T1570,
T1670 tractors. Secure the 4" pulley (item 4)
on the other end of the subframe shaft
(item 2) with a spacer ring (item 5) using a
1/4"NC x 2 1/2" socket head capscrew
(item 3) and a 1/4"NC nylon insert locknut.
2. (FIGURE 3) Secure the belt guide (item 1)
on the belt guide support (item 2) using two
1/4" NC x 3/4" lg hex. bolts (item 3), 1/4"
lockwashers and 1/4" NC hex. nuts. Use the
upper holes of the belt guide support (item
2) for T1760, T1770, T1870 tractors and the
other holes for T1460, T1560, T1570,
T1670 tractors.
3. Remove the mower linkages from the
tractor frame and retain the two 1/2" pins
(fig.5, item 4) for reuse when attaching the
rear subframe of the snowblower. The two
cotter pins will not be used again.
Figure 2
T1770, T1870
T1570, T1670
5