7. Fill with the new KUBOTA SUPER UDT fluid up to
the upper notch on the dipstick.
(See LUBRICANTS, FUEL, AND COOLANT on
page 90.)
[Manual transmission type]
(1) Dipstick
(A) Range which transmission
oil level is acceptable within
[HST type]
(1) Dipstick
(A) Range which transmission
oil level is acceptable within
(2) Oil inlet
8. After running the engine for a few minutes, stop the
engine and check the level of the transmission oil
again. Add the transmission oil to the prescribed
level.
Transmission oil
capacity
Manual trans-
mission
2WD
28 L
(7.4 U.S.gals.)
4WD
28.5 L
(7.5 U.S.gals.)
HST
4WD
23.5 L
(6.2 U.S.gals.)
9. Make sure that the transmission fluid does not leak
past the seal on the hydraulic-oil-filter.
IMPORTANT :
• Do not operate the tractor immediately after
changing the transmission fluid.
Run the engine at medium speed for a few
minutes to prevent damage to the transmission.
4. Replacing the fuel filter
1. Remove the fuel filter.
2. Put a film of clean fuel on the rubber seal of the
new filter.
3. Tighten the fuel filter quickly until it contacts the
mounting surface.
4. Tighten the fuel filter by hand an additional 1/2 turn
only.
(1) Fuel filter
SERVICE EVERY 400 HOURS
PERIODIC SERVICE
L3301,L3901
113
Содержание L3301
