Kubota L2674, Руководство оператора и каталог запасных частей

Страница: 26 / 42

OPERATION
OM 0341SB74-A
22
G
ENERAL
P
REPARATION
1. Read the operator’s manual carefully
before using the tractor and snowblower.
Be thoroughly familiar with the controls and
proper use of the equipment. Know how to
stop the unit and disengage the controls
quickly.
2. Make sure the snowblower is clear of snow
before engaging the driveline.
3. Make sure the auger and fan operate
freely.
4. Check the oil level in the worm gear box
and if necessary, add 80W90 SAE gear oil,
AGMA 5EP oil or equivalent.
5. Check the two shear bolts, one on the driving
shaft, and the one on the PTO, for proper
tightness.
6. Adjust so that the snowblower skid shoes
run level.
7. Wear adequate winter outer garments
while operating equipment.
O
PERATING CONTROLS
Manual Chute Rotation
Turning the handle in a clockwise direction
turns the chute in the clockwise direction too.
Raising and Lowering the Snowblower
Refer to your tractor operator's manual.
Rear Power Take Off Operation
Refer to your tractor operator's manual.
WARNING: To avoid personal injury,
be sure the tractor engine is off, the rear
PTO shaft is disengaged, and all movement
has stopped before making any
adjustments.
Work and Travel Speed
Working ground speed will depend on the
depth and density of the snow to be cleared.
Normally, ground speed will range from 4 to 7
MPH for light, dry snowfalls 3 to 6 inches, and
1 to 3 MPH for heavy, wet or drifted snow. To
transport, disengage the rear PTO and raise
the snowblower to full transport height.