Kubota KX61-3, Руководство по эксплуатации

Страница: 62 / 138

Operation
62
•
When driving on gradients, let the bucket slide over the
ground if the terrain allows it.
Notes for rubber crawler operation
•
Driving or turning on sharp objects or over steps causes
excessive wear on the rubber crawlers and will lead to
breaking of the rubber crawler or cause the crawler running
surface and the steel inserts to be cut.
•
Make sure that no foreign objects get stuck in the rubber
crawler. Foreign objects lead to excessive crawler wear and
can cause it to break.
•
Keep oil products away from the rubber crawlers.
•
Remove any fuel or hydraulic oil spilled on the rubber crawlers.
Making sharp turns
•
On streets with a high-friction tarmac, e.g. concrete, do not make sharp turns.
Protecting the crawler against salt
•
Do not work with the machine on the seashore. (The salt will cause the steel insert to corrode.)
Operating the controls during excavation work
Always observe the following safety instructions when working with the excavator.
•
Never crush concrete or boulders using side boom swings with the bucket.
•
Do not use the dropping action of the bucket for excavation.
•
Never fully extend the cylinders. Always keep a certain safety margin, especially when operating with a
breaker (accessory).