Kubota KX080-3, Руководство оператора

Страница: 95 / 115

73 REGULAR CHECKS AND MAINTENANCE WORK
9. Fill oil again up to the center of the gauge.
10.Install the hydraulic tank cover and tighten the oil filling
plug.
B Hydraulic Oil Check with Hydraulic
Hammers
The hydraulic oil change after 1000 operating hours in the
operator's manual is based on normal excavator work.
Following inspection measures are valid when hydraulic
hammers are used:
1. Changing and filling up of hydraulic oil
(1) The hydraulic oil must be changed more often
when hammers are used because the machine is
subject to harder conditions than normal
excavating work.
(2) Use only the recommended oils mentioned in the
operator's manual when changing or filling with
oil.
(3) When filling up oil, do not mix oils of different
makes.
2. Changing the return filter cartridge and oil
(1) The filter cartridge must be changed more often
because of contamination resulting from the
frequent assembly and disassembly of the hoses.
(2) Use the correct replacement filter cartridge.
(3) Oil change according to operating hours.
EVERY 1000 SERVICE HOURS OR ONCE A
YEAR
B
Replacing Air Filter Element
Open the engine hood and remove the dust-cover.
Remove and replace the outer element and inner element
with new elements.
When reassembling, install the dust-cover so that its TOP
mark (arrow) faces up-wards.
A Shorten the replacement period if the machine is used
in dusty or sandy areas.
Hydraulic
oil volumes
Hydraulic
tank
75 L
Whole oil
volumes
146 L
Hydraulic oil Return filter cartridge
Normal
excavator
work
every 1000
Hrs.
every 500 Hrs.
(250 Hrs. after first
operation)
Hammer
work
portion
20% every 800 Hrs.
every 200 Hrs.
40% every 400 Hrs.
60% every 300 Hrs.
every 100 Hrs.
more every 200 Hrs.
(1) Inner element
(2) Outer element
(3) Dust-cover
(4) Clamps