Kubota KX080-3, Руководство оператора

Страница: 42 / 115

OPERATION OF THE ENGINE 20
STARTING THE ENGINE UNDER COLD
CONDITIONS
To avoid personal injury:
A
Make sure that the lock lever is in the lock
position during warm up.
Start the engine in the following manner;
1. Pull the lock levers all the way back (lock position).
2. Turn the starter switch to the position "RUN" (glow
position) and keep until the indicator lamp has gone
out.
3. Move the starter switch to the position "START" to
crank and start engine.
4. Release the starter switch after the engine has started;
it will automatically return to the position "RUN ".
A
Let the engine warm up after start-up for approx. 10
minutes under no load conditions. If the hydraulic fluid
temperature is too low, the operation will be affected.
Do not operate the excavator under full load until the
engine has sufficiently warmed up.
STOPPING THE ENGINE
To avoid personal injury or death:
A
Do not keep the bucket or dozer in the lifted
position, as a person could accidentally touch
the levers and cause serious accidents.
B
Engine Stop Button
To avoid personal injury:
A
Keep hands away from rotating parts.
A
Be sure to return the stop button to former position
after the engine stops.
The engine stops when the key is turned off. If the engine
does not stop, open the engine hood (See "Opening /
Closing of the Engine Hood" in "MAINTENANCE" section)
and pull back the stop button and hold it until the engine
stops.
1. After slowing the engine to idle, turn
the key to "STOP".
2. Remove the key.
(1) Stop button