CHECKS BEFORE START
18
B
Auto Idle Switch
The switch is used to enable and disable the Auto Idle
control.
B
Throttle Potentiometer
1. Sit down on the operator's seat and turn the throttle
potentiometer clockwise (toward the high speed), and
the engine revs up.
2. To stop the engine, turn the throttle potentiometer fully
toward the low speed and keep the engine at the idling
speed. Then set the starter key to the
"STOP"
position.
B
Travel Speed Switch
Travel speed will increase when this switch is pushed
down.
Switching the dual travel speed:
1. Press the travel speed switch. The buzzer beeps twice
and the travel speed changes from low to high. The
symbol lights up.
2. Press the travel speed switch again, and the buzzer
beeps once and the travel speed changes from high
speed to low. The
symbol goes out.
A
When activating the travel speed switch, it must be
pushed down completely.
A
Each time the travel speed switch is pressed, the
travel speed is switched between low and high.
A
Enable:
Press the Auto Idle switch. When the
Auto Idle control is on, the Auto Idle lamp
stays on.
A
Disable:
Press the Auto Idle switch once again.
Now the Auto Idle control is deactivated
(The Auto Idle lamp goes out.)
(1) Auto idle switch
(2) Auto idle lamp
(1) Throttle potentiometer
(1) Travel speed switch
(2) Speed indicator light
Содержание KX040-4
