Kubota KX040-4, Руководство оператора

Страница: 41 / 134

17 CHECKS BEFORE START
B
When the Check-up is Completed
When the check-up is completed, perform the following
procedure to make the Periodic Check disappear from the
screen.
1. The message below appears onscreen to prompt the
completion of the check-up.
2. To take a look at the check points, press the
information switch. The check points appear
onscreen.
3. When the check-up has been completed, press the
switch 5. If not, press the switch 1 to go back to the
previous screen.
B
Horn Switch
B
Light Switch
When the starter switch is in position "RUN", the working
light(s) and CAB light(s) will be switched on by pressing
the switch.
C
Night operation
To avoid personal injury:
A
When the working light and CAB light alone do
not provide sufficient visibility, prepare
additional stationary artificial lighting and
observe safety rules for night work.
B
AUX Port Flow Rate Limit Switch
It is possible to freely readjust the actuator's maximum
flow rate in the AUX operating mode.
(See
"AUX PORT OPERATION" section for detail.)
(1) Switch 4
(2) Switch 1
(3) Switch 5
(1) Horn switch
(1) Light switch
(1) AUX port flow rate limit switch