Kubota K008-3, Руководство по эксплуатации

Страница: 59 / 112

Operation
59
Do not operate the excavator with the narrow track
width (750 mm), risk of flipping. Always use the
standard track width (990 mm) unless you pass
through narrow places on a flat surface.
Changing the standard dozer blade width to narrow:

Pull out the lock pin (1) and remove the dozer extension (2).

Attach the dozer extension as shown in the figure, fit in the
lock pin.

Use the same procedure for the other side (left or right) as
well as for the adjustment of the track width from narrow to
standard.
Swivelling the roll-over safety bar upward and downward and locking it

Position the front attachments as illustrated.

Turn off the engine (page 55).

Pull out the safety bolts (1 and 2).

Pull out the locking bolts (3 and 4).

Grasp the upper part (5) of the safety bar firmly with both
hands at the highest point possible above the swivel joints.

Slowly swivel the upper part of the safety bar downward.
Take care to assure that your hands are not
crushed during the downward movement.
The excavator must not be operated when the
safety bar has been swivelled downward. Always
carry out work with the safety bar swivelled upward,
unless you drive through a low passageway on a
flat surface.