Kubota K008-3, Руководство по эксплуатации

Страница: 57 / 112

Operation
57

Raise the dozer blade to the top position by pulling the
dozer control lever (1) back.

Select an appropriate engine speed.
Adjusting the track width of the K008-3
For models with extendable track width, adjust the desired track
width prior to operation. To do this:

Move the selector lever for the dozer/extendable track width
(1) fully to the right (figure position ).
To change the track width, both track width cylin-
ders need to be either fully extended (standard
track width) or retracted (narrow track width).

Using the dozer control lever (1), adjust the desired track
width.

To decrease the track width from 860 to 700 mm, move the
dozer control lever forward (figure position ).

To increase the track width from 700 to 860 mm, move the
dozer control lever backward (figure position ).

After adjusting the track width, immediately move the selec-
tor lever for the dozer/extendable track width fully to the left
(figure above, position ).