Kubota BX1880 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 114

Kubota BX1880 Скачать руководство пользователя страница 83

Items

Interval

Remarks

Fuel filter

Replace

Every 200 hr

Consult your local
KUBOTA Dealer for
this service.

Fuel hose

Check

Every 6 months

Replace if any dete-
rioration (crack,
hardening, scar, or
deformation) or
damage occurred.
If you feel you are
unable to make the
following service
correctly and safety,
contact your local
KUBOTA Dealer.

Replace

Every 2 years

Consult your local
KUBOTA Dealer for
this service.

Long term storage for B5

• BDF easily deteriorates due to oxygen, water, heat,

and foreign substances. Do not store B5 longer
than 3 months.

• When using B5 fuel and storing the machine longer

than 3 months, drain the fuel from the tanks and
replace with light-mineral-oil-diesel-fuel.
Subsequently, run the engine at least the following
minutes to remove all of the biodiesel from the fuel
lines.

Running the engine

30 minutes

Long term storage for B6 through B20

• BDF easily deteriorates due to oxygen, water, heat,

and foreign substances. Do not store B6 through
B20 longer than 1 month.

• When using B6 through B20 fuel and storing the

machine  longer  than  1  months,  drain  the  fuel  from
the  tanks  and  replace  with  light-mineral-oil-diesel-
fuel.  Subsequently,  run  the  engine  at  least  the
following minutes to remove all of the biodiesel from
the fuel lines.

Running the engine

30 minutes

LUBRICANTS, FUEL, AND COOLANT

MAINTENANCE

BX1880,BX2380,BX2680

79

«
...
81
82
83
84
85
...
»

Содержание BX1880



















































































































Отзывы:

Нет отзывов