Kubota BX1880 Скачать руководство пользователя страница 75

Страница: 75 / 114

2. Rear wheels

IMPORTANT :

• Do not the turn rear discs to obtain wider tread.
• Always attach tires as shown in the figures in the following table.

If you not attach the rear wheel as illustrated in the table, transmission parts may be damaged.

You can not adjust width of the rear tread.

Models

BX1880

BX2380 and BX2680

Tire

24x12.00-12 Turf, 24x12.00-12 Bar

26x12.00-12 Turf, 26x12.00-12 Bar, 26x12.00-12 Ind.,

26x12.00-12 R14.

Tread

(A) 820 mm

(32.2 in.)

(B) 820 mm

(32.2 in.)

How to jack up rear part of the tractor

WARNING

To avoid serious injury or death:

• Before jacking up the tractor, park it on a firm and level ground and chock the front wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight and set them up as shown in the following figure.

(1) Frame

(2) Jack point

WHEEL TREAD

TIRES, WHEELS, AND BALLAST

BX1880,BX2380,BX2680

Содержание BX1880



















































































































Результаты поиска

Содержание BX1880

Отзывы:

Kubota BX1880, Руководство оператора, Страница: 75 / 114

Результаты поиска

Содержание BX1880

Отзывы: