Kubota BX1880 Скачать руководство пользователя страница 38

Страница: 38 / 114

• Engage 4-wheel drive when traveling down a

slope.

(1) Brake pedal
(2) Parking brake lock pedal
(A) Depress

(B) Push down parking brake

lock pedal while depressing
brake pedal

3.1 How to use the parking brake

NOTE :

• It is recommended that the operator practice

engaging and disengaging the parking brake on
a flat surface without the engine running before
operating the tractor for the first time.

To set the parking brake

1. Depress the brake pedal.
2. Latch the brake pedal on pushing and holding the

parking-brake-lock-pedal.

3. Release the brake pedal.

(1) Brake pedal
(2) Parking brake lock pedal
(A) Depress

(B) Push down the parking

brake lock pedal while de-
pressing the brake pedal

To release the parking brake

Depress the brake pedal again.

4. Range gear shift lever (Hi-Lo)

You can shift the range-gear-shift-lever only when
tractor is completely stopped.

WARNING

To avoid serious injury or death:

• Make sure that the range-gear-shift-lever is fully

engaged into the high

position or the low

position before climbing or descending a slope.

IMPORTANT :
Do not force the range-gear-shift-lever.

• If it is difficult to shift the range-gear-shift-lever

into the neutral [N] position, you should attempt
the following procedure.
1. Depress the brake pedal firmly for several

seconds.

2. Without reducing the force to depress the

brake pedal, shift the range-gear-shift-lever.

• If it is difficult to shift the range-gear-shift-lever

into the low

position or the high

position

from the neutral [N] position, you should
attempt the following procedure.
1. Slightly depress the speed-control-pedal to

rotate the gears inside of transmission.

2. Release the speed-control-pedal to the

neutral [N] position.

3. Shift the range-gear-shift-lever.

• To avoid damage of transmission, stop the

tractor before shifting the range-gear-shift-lever
between ranges.

(1) Range gear shift lever (Hi-

Lo)

(A) Low

(B) Neutral position
(C) High

5. Front wheel drive lever

Use the front-wheel-drive-lever to engage the front
wheels with the tractor stopped.

WARNING

To avoid personal injury or death:

INSTRUMENT PANEL AND CONTROLS

FOOT CONTROLS AND HAND CONTROLS

BX1880,BX2380,BX2680

Содержание BX1880



















































































































Результаты поиска

Содержание BX1880

Отзывы:

Похожие инструкции для BX1880

Бренды по названию

Популярные бренды

Kubota BX1880, Руководство оператора

Результаты поиска

Содержание BX1880

Отзывы:

Похожие инструкции для BX1880

Бренды по названию

Популярные бренды