Kubota AP-SRT62, Руководство оператора

Страница: 16 / 36

12
Section 2: Adjustments
AP-SRT62, & AP-SRT76 Rotary Tillers 321-095MK
Table of Contents
7/31/17
2" Tilling Depth, Tiller Rotated Back
Refer to Figure 2-4:
From level position, retract hydraulic cylinders at the front
of the skid steer loader arms until arrow on depth
indicator points to the 2" mark above “FULL DEPTH” as
shown in upper right corner of illustration.
When using this depth setting, the tiller can be operated
in standard rotation or reverse rotation while traveling
forward only.
2" Tilling Depth, Tiller Rotated Forward
Refer to Figure 2-5:
From level position, retract hydraulic cylinders at the front
of the skid steer loader arms until arrow on depth
indicator points to the 2" mark below “FULL DEPTH” as
shown in upper right corner of illustration.
!
CAUTION
To avoid serious injury:
Do not use reverse rotation when backing up with tiller
rotated forward to till 2" deep. The tiller can throw objects at
the operator causing serious injury.
When using this depth setting, the tiller should be
operated in standard rotation only while backing up.
IMPORTANT: Do not till backing up when tiller is
rotated back to till 2" deep. The skid shoes can dig
into the ground causing damage to the tiller.
IMPORTANT: Do not till traveling forward when tiller
is rotated forward to till 2" deep. The skid shoes can
dig into the ground causing damage to the tiller.
Tiller Rotated Back to 2" Depth
Figure 2-4
Tiller Forward Level to 2" Depth
Figure 2-5
37815
37816