Kubota AP-SGM1566, Руководство оператора

Страница: 12 / 30

Section 1: Assembly & Set-Up
Table of Contents
4/11/19 AP-SGM1566, AP-SGM1572, & AP-SGM1578 Grapples 380-051MK
8
Pre-Assembly Checklist

Check Referenc
Have a fork lift or loader with properly sized chains and safety
stands capable of lifting and supporting the equipment on hand.
Have a minimum of two people available during assembly.
Make sure all major components and loose
parts are shipped with the machine. Assembly
& Set-up
Double check to make sure all parts, fasteners,
and pins are installed in the correct location.
Refer to the Parts Manual if unsure.
NOTE: All assembled hardware from the factory
has been installed in the correct location.
Remember location of a part or fastener if
removed. Keep parts separated.
Operator’s
Manual
380-051MK
Parts Manual
380-051PK
Make sure working parts move freely, bolts are
tight & cotter pins are spread. Operator’s
Manual
Make sure all grease fittings are in place and
lubricated.
Page 19
Make sure all safety labels are correctly located
and legible. Replace if damaged.
Page 6
Section 1: Assembly & Set-Up
Skid Steer/Tractor Requirements
The SGM Series Manure Grapples are designed to
attach to a universal quick attach mounting system.
Consult the skid steer or tractor Operator’s Manual for
operating capacity, lifting capacity, and operating
specifications. They will vary from unit to unit. Do not
exceed the rated capacities and specifications of the
skid steer or tractor.
WARNING
!
To avoid serious injury or death:
•
Consult your power machine’s manual for operating
capacity, lifting capacity, and operating specifications.
Exceeding rated capacities and specifications can result
in a roll-over or other serious hazard.
•
Lightweight power machines may need weight added to
the rear to maintain steering control and prevent forward
tipping or side tipping caused by a heavy front load.
Consult your power machine Operator’s Manual to
determine proper weight requirements and maximum
weight limitations.
Torque Requirements
Refer to “Torque Values Chart” on page 23 to
determine correct torque values when tightening
hardware.
Before You Start
Make sure that the intended skid steer/tractor
conforms to the requirements provided on this page.
Also, read and understand this Operator’s Manual for
your Manure Grapple. An understanding of how it
works will aid in its assembly and set-up.
Go through the “Pre-Assembly Checklist” on this
page before assembling the Manure Grapple. To
speed up your assembly task and make the job safer,
have all needed parts and equipment readily at hand.